Etichete
Produse vizualizate
Modul wireless cu iesire analogica...
New product
Modul wireless cu iesire analogica T24-AO1i
Producator: LCM Systems
This product is no longer in stock
Availability date:
Modul wireless cu iesire analogica T24-AO1i
Modul wireless cu iesire analogica T24-AO1i
Producator: LCM Systems
Destinatar(i) :
* Câmpuri obligatorii
sau Anulează
Features :
T24-AO1i provides a configurable analog output for the range of T24 acquisition modules. The T24-AO1i is housed in an IP65 housing for industrial installation.
The output can be selected from the pre-calibrated voltage and current ranges. 0-10Volts, ±10Volts, 0-5Volts, ±5Volts, 0-20mA, 4-20mA. which can be used in either ‘sink’ or source mode.
LED’s in the T24-AO1i provide indication of the state of the radio link, remote battery life and remote status. The T24-AO1i uses open collectors outputs to relay this information
A digital Input allows for zeroing of the incoming data value.
The T24-AO1i modules are easily configured using the T24 Toolkit software and a base station.
LCM Systems can supply the T-24 products integrated into various sensors, to form a wireless sensor system. There are several standard products which utilise the T24 range, including the TELSHACK range and RILL ranges.
Please contact LCM’s technical department to discuss your wireless load cell requirements.
Specification :
General Radio |
||||
Parameter | Min | Typical | Max | Units |
Licence | Licence Exempt | |||
Modulation method | MS (QPSK) | |||
Radio type | Transceiver (2 way) | |||
Data rate | 250 | K bits/sec | ||
Radio Frequency | 2.4000 | 2.4835 | GHz | |
Power | 1 | mw | ||
Channels (DSSS) | 16 |
Approvals |
|||||
Complies with EMC directive. 2004/108/EC The Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive, 1999/5/EC. | |||||
Family: RAD24 | IC:7224A-RAD24 |
* Maximum range achieved in open field site with T24-AO1i at a height of 3 metres above ground Electrical/Environmental |
||||
Parameter | Min | Typical | Max | Units |
External Supply Voltage Range | 9 | 12 | 36 | V dc |
Operational Current | 85 | 150 | mA | |
Reverse Polarity Protection | -36 | V dc | ||
Digital Output Drive Current | 20 | mA | ||
Digital Output Drive Voltage | 30 | Vdc | ||
Digital Input Load Impedance | 100 | ohms | ||
IP rating | IP65 | |||
Operating temperature range | -40 | +65 | °C | |
Storage Temperature | -40 | +85 | °C | |
Humidity | 0 | 95 | %RH | |
Voltage Output | Min | Typical | Max | Units |
Resolution | 16 | Bits | ||
Output Gain Stability | 0.008 | 0.015 | ±%FS/°C | |
Short Term Stability (1 hour) | 0.003 | 0.01 | ±%FS | |
Long Term Stability (10,000 hours) | 0.03 | 0.1 | ±%FS | |
Residual Ripple | 40 | mV pk-pk | ||
Minimum Load Impedance | 5000 | ohms | ||
Linearity | 0.007 | 0.01 | ±%FS | |
Bandwidth (-3dB) | 200 | Hz | ||
Current Output | Min | Typical | Max | Units |
Resolution | 16 | Bits | ||
4-20mA Output Gain Stability | 0.006 | 0.12 | ±%FS/°C | |
4-20mA Output Zero Stability | 0.005 | 0.01 | ±%FS/°C | |
Short Term Stability (1 hour) | 0.006 | 0.018 | ±%FS | |
Long Term Stability (10,000 hours) | 0.06 | 0.2 | ±%FS | |
Residual Ripple | 0.032 | mA pk-pk | ||
Settling time to ±0.5uA (thermal effects) | 5 | seconds | ||
Maximum Load impedance | 500 | ohms | ||
Linearity | 0.01 | 0.02 | ±%FS | |
Bandwith (-3dB) | 200 | Hz |
Nu sunt opinii ale clienților în acest moment.