Informații
.
WEIGHT AND CHECK FUNCTIONS |
|
 |
- Static or dynamic weighing of packs, both automatically as well as semiautomatically with the operator.
- Management of the cadence belt, for optimising the number of packs per minute weighed by the instrument (cadence belt not included), through cadence photo cell (optional).
- Setting of the density coefficient for each article, for weighing in ml.
- Programmable alarm enabling and tolerance indication time.
- Tolerance check:
- Upon target, through article database, with setting of 3 tolerance thresholds, for the physical division of the packs into 7 different groups. - Upon programmable weight thresholds (min/max), with article database. - Upon weight thresholds (min/max), with quick entry function.
- Printout with each executed weigh with eventual automatic storage in the alibi memory.
- Automatic printout and clearing of the partial total after a programmable number of weighs.
- Static or dynamic automatic zero function of the belt (up to 2% of the capacity) after a programmable number of weighs.
- Management of the automatic expulsion through its specific relay contact (expeller not included in the supply), or halt of the belts for manual expulsion or weight correction.
- Possibility of connection to RS485 network or ethernet.
- Programmable preset tare and enabling delay of the expeller for each article.
- Automatic calculation of the weigh time and pack positioning, for optimising the functioning of the system.
- Database of 1000 articles, with programmable alphanumeric description, density, targets, tolerance thresholds, and preset tare for each article.
- Selection of the article through bar code reading.
- Advanced bar code management, with the possibility of storing, processing, and printing 5 different codes.
- Configuration and calibration of the instrument through the tool on the PC.
- Report with date and time of cycle beginning and end with statistics of the checks and/or activities, standard deviation of the executed weighs, and totals by class and/or article.
- Possibility of connection to a control light.
|
 |
 |
 |
TECHNICAL SPECIFICATION |
|
 |
- Bearing structure and frame in painted steel or in extra thick STAINLESS steel.
- Loading platform with motor driven conveyor mat, with adjustable height and direction.
- Rear handling and positioning wheels, and adjustment and fixing feet.
- Adjustable weighing belt speed: from 8 to 25m/min, max 25 PCS/min (higher speed upon price estimate).
- Electromechanical automation for belt command and 6 auxiliary relays (up to 5A 220V).
- Fitted with pack presence and weigh end photo cells (for dynamic weighing), with adjustable reading distance.
- Overall switch, emergency button, start/restart button, optical/acoustic alarm (in painted steel versions).
- Easy to consult backlit LCD graphic display, with clear visualisation of the weight and automation status; selection of the language from the menu.
- Selection of the data (totals, progressives, weight...) shown on the graphic LCD display.
- Waterproof 25 key numerical-functional keyboard, which allows to easily enter the target, alphanumeric texts, codes, etc. IP65 protection degree of the front panel, against dust and sprays.
- Keyboard functions completely configurable according to one’s requirements.
- Real time clock and permanent memory data.
- Built-in alibi memory, for CE-M transmission of the weight data to the PC or printer.
- 240Vac 50Hz power supply.
|
 |
 |
 |
I/O SECTION |
|
 |
- 8 digital inputs and 16 outputs for command switch on the line.
- 1 RS232/C serial port for managing a built-in printer, or labeller.
- 1 RS232/C bidirectional port for data exchange with PC/PLC.
- 1 RS485 bidirectional port for network connection with other devices and communication with PC/PLC.
- 1 keyboard emulation input for connection to PC keyboard or bar code reader.
|
Code |
Belt l x w (mm) |
h min/MAX (mm) |
Max (kg) |
d (g) |
DLW10/5080R2 |
800x500 |
450 / 850 |
6, 15 or 30 |
2, 5 or 10 |
DLW10/6510R2 |
1000x650 |
450 / 850 |
15 or 30 |
5 or 10 |
DLW10I/5080R2  |
800x500 |
450 / 850 |
6, 15 or 30 |
2, 5 or 10 |
AVAILABLE UPON REQUEST: STAINLESS STEEL version fitted with 1000x650 mm belt.

|
NOTE: - The order of the DLW is possible only upon verification of the system's data (executed by our technicians when the specific filled-in module) is sent. - The capacity and division must be specified in the module for the verification of the feasibility, consequently to the requested features.
|
Calibration service only available at time of order
|
Code |
Description |
|
 |
CT4 |
ISO 17025 calibration certificate from 6 to 60 kg. For precision and industrial scales, crane scales. |
|
Options only available at time of order
|
Code |
Description |
|
 |
SWM |
WeiMonitor PC program for monitoring and recording weighs in real time, from one or more scales. |
|
|
DLWMMC |
Memory data printer for mounting on DLW, with connection cable, memory card, power supply from weight indicator. |
|
 |
ETHD |
(S2) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols. |
|
 |
KBCBCE |
(S1) PC keyboard or barcode reader cable with MINI DIN connector. |
|
|
FCC |
Cadence photo cell for management of the cadence belt (not included). Installation not included. |
|
DLW10: dimensions in mm.

L= length of the conveyor belt: 800 mm (max. 815 mm with stretched belt) in the "5080" version 1000 mm (max. 1015 mm with stretched belt) in the "6510" version
P= width of the conveyor belt: 500 mm in the "5080" version 650 mm in the "6510" version
h= height of the weighing surface, to be indicated in the data request form: min: 450mm MAX: 850mm
Q= DLW depth: 885 mm in the "5080" version 1030 mm in the "6510" version |
.