|
Accessories
| Name |
Model |
Applications |
Specifications |
| Lead Solder |
SD-704 |
Strain gages soldering |
φ1.0,normal melting temperature 183℃ |
| SD-705 |
φ2.0,high temperature melting tem.267℃ |
| Soldering Flux |
S-620 |
Strain gages soldering |
25 grams |
| Silver-plated Copper Wire |
L-706 |
Connecting wires |
φ0.15, 75 grams/roll |
| 4-Wire Lead Wires |
CL-707 |
|
φ1.2, 0.42 grams/meter |
| High Temp.Lead Wire |
GL-708 |
Connecting,Bridging
Application
Tem.range:0-260 |
φ1.2, 200 meters/roll |
| Varnish Wrapped Wire |
QL-717 |
Strain gages soldering |
φ0.15 |
| Silicon Rubber |
SL-710 |
Cure |
Thickness:3mm,5mm(300x300mm) |
Polishing Materials
for Adjusting
Resistance |
T-711 |
Adjust resistance |
Dia.1 micron |
| Tyflon Film |
PTFE |
Bonding ,Cure |
Width:90mm,thickness:0.05mm |
| Tweezers |
ZN-712 |
Bonding,holding
strain gages |
Round header,length 100mm |
| Brand Iron Header |
B-622 |
Soldering strain gages |
|
| Cotton yarn |
M-713 |
Cleaning strain gages |
|
| Brush |
M-714 |
Cleaning and bordiny
strain gages |
|
| Sand Paper |
SP-715 |
Polishing to remove
the oxide of
the tested object |
220#-400# |
| Polyimide Tape |
PT-716 |
Fixing strain gages |
Width 8mm,5 meter/roll |
Strain gages adhesive
|
H-600 High Performance Epoxy
Features:
Fast drying,low viscosity,minimum creep and
hysteresis,excellent repeatability and stability,
highinsulation over a wide temperature range:
Short term：-269～+370℃;
Long term：-269～+288℃ .
Applications:
It is used to replace H-610. Excellent for bonding
of all gages and compensation resistors made by
our company.Specially recommended for high
precise transducers.
Curing Condition:
Used within 150℃：
0.1～0.3Mpa, +135℃/2hours；
Postercure：+165℃/2 hours。
Used within 250℃：
0.1～0.3Mpa，+150℃/2hours；
postercure：+175℃/2hours。
Stock Period:
6 months at 24℃ or 12 months at +2℃ in a
single composition.
|
H-610 High Performance Epoxy
Features:
Fast drying,low viscosity,minimum creep and
hysteresis,excellent repeatability and stability,
high insulation over a wide temperature range:
Short term：-269～+370℃;
Long term：-269～+288℃.
Applications:
Excellent for the bonding of all gages and
compensation resistors made by our company.
Specially recommended for the high precision
transducers.
Curing Condition:
Used within 150℃: 0.1～0.3Mpa. 2 houss at +135℃,
Postercure 2 hours at +165℃
Stock Period:
6 months at 24℃ or 12 months at +2℃ in a single
composition.
|
X-602 Modified Phenolic-acetal
Features:
Having a moderate viscosity, small creep and
hysteresis.Good repeatability and stability.
Operating temp.range: -30～+60℃
Applications:
Special recommended for the bonding of BE,
R series strain gages or compensation resistors.
It's possible to cure without pressure.
Curing Condition:
0.1～0.3Mpa. 2 hours at +120℃ Postercure 2
hours at +180℃.
Stock Period:
Months at room temperature. |
AZ-709 Polyure Thane
Features:
Having so excellent properties as waterproof,
moisture proof,wildew resistant and high insulation.
Dry at room temperature.
Operating temp.range -30～+60℃
Applications:
Recommended for the bonding of waterproof gages.
It may be also used for protective coating for
transducers and gages.
Curing Condition:
Cure 24 hours at room temperature also can
cure rapidly at elevated temp. for 4 hours at +80℃
Stock Period:
months at room temperature in a single composition.
|
H-611 Special Epoxy
Features:
Double composition.No solvent. Cure at normal
temperature and pressure.
Operating temperature range:-30～+60℃.
Applictions:
Special recommended for bonding of compensation
resistors.Tabs gages and stress analysisat normal
temperature and pressure.
Curing Condition:
24 hours at room temperature.
Stock Period:
10 months at room temperature in a single
composition. |
A-713 Polyidide
Features:
With a stable performance, small creep and
hysteresis.
Operating temperature range:-30～+280℃
Applications:
Recommended for the bonding of high elongation
gages for measuring at middle temperature.
Curing Condition:
0.1～0.2Mpa for 1 hours at +120℃; 3 hours at +180℃
Stock Period:
12 months at +2℃
|
F-601 Phenolic-acetal Epoxy
Features:
With high viscosity,good stability and wide
operating temperature range.
Operating temperature range:-60～+250℃
Applications:
Recommended for the bonding of BB,BA series
strain gages. Used at moderate temperature.
Curing Condition:
0.1～0.3Mpa used within 150℃:
1 hours at +100℃; 3 hours at +150℃.
Postercure 2 hours at +170℃;
For BB series strain gages with temperature
up to 250℃:
Stock Period:
10 months at +10℃ |
G-704/G-D04 Room temperature sulfid
silicon rubber
Features:
Having so excellent properties as waterproof,
moisture-proof,meldew resistant and high insulation.
Operating temperature range: -30～+100℃
Applications:
Recommended for the protective coating of
transducers and strain gages for stress analysis.
Curing Conditon:
16~24 hours at normal temperature and pressure.
Stock Period:
12 months at room temperature in single composition.
|
|
X-714 Acetal
Features:
Moderate ciscosity,easy to dilute, fast drying.
Small hysteresis, good repeatability and
stability are this kind of adhesive's characteristics.
Operating temperature range:30～+150℃
Applications:
Recommended for the bonding of BQ series
strain gages.
Curing Condition:
1～0.2Mpa for half an hour at +80℃,
2 hours at +160℃
Stock Period:
6 months at room temperature.
|
B-720 Cyanogen acrylate
Features:
Having good bonding,small creep and hysteresis.
And it can be used easily. But elevated temperature
and moisture will deteriorate its performance
Applications:
Recommended for the bonding of common strain
gages and for short term stress analysis.
Curing Condition:
Press with finger, Cure 3 hours at room temperature.
Stock Period:
3 months at +2℃ without direct light and moisture
resistant.
|
GD-711 Modified epoxy
Features:
Double composition with good bonding and can
be used easily.It also has high insulation.
Operating temperature:-60～+260℃
Applications:
Used to fix the lead wire of the strain gages.
Curing Condition:
Cure 3 hour at +60～+80℃ or 3 days at room
temperature.
Stock Period:
9 months at +2℃ for single composition 1 hour
after mixed. |
|
|
Mărește
