Senzor izometric de forta UF1
Senzor izometric de forta UF1
Producator: LCM Systems
UF1 Low Range Isometric Force Sensor
Documentație
- Capacităţi: 25 la 1500g
- Abatere mică
- Sensibilitate mare de ieşire
- Domeniu superior de sensibilitate
- Metodă versatilă de conectare a semnalului
- Configuraţie versatilă de instalare
Seria de senzori de forţă UF1 produsă de LCM Systems a fost utilizată la scară largă în numeroase aplicaţii timp de mai bine de 40 de ani. UF1 s-a dovedit a fi prima opţiune pentru numeroase aplicaţii, inclusiv monitorizarea mişcării musculare şi a membranei, controlul tensiunii firelor şi materialelor textile, măsurarea viscozităţii lichidelor şi chiar forţa indusă aripilor fluturilor în timpul zborului
Există numeroase aplicaţii pentru care a fost utilizată seria UF1. Este extrem de populară în aplicaţiile unde este necesară măsurarea forţelor mici, beneficiind de un nivel bun de precizie, abatere minimă, precum şi în cazul în care este necesară o configuraţie flexibilă de montaj.
Seria UF1 poate fi furnizată individual sau în combinaţie cu oricare din gamele largi de instrumente de măsură şi control ale LCM Systems, pentru furnizarea unui pachet de monitorizare sau control simplu sau mai complex.
UF1 Low Range Isometric Force Sensor
Features :
- Ranges 25g (1oz) to 1500g (54oz)
- Low Deflection
- High Output Sensitivity
- High Overload Range
- Versatile signal connection method
- Versatile Mounting Arrangement
The LCM Systems UF1 series force sensors from the range of Pioden Transducers has been widely used in many applications for more than 40 years.
The UF1 has proved the first choice for many applications including muscular and membrane movement monitoring, yarn and fabric tension control, fluid viscosity measurement and even the force induced in butterfly wings during flight.
There are many other applications that the UF1 has been used in. It is most popular in applications where our customers need to measure small forces, with a good level of accuracy, minimal deflection and with a flexible mounting arrangement.
The UF1 can be supplied on it’s own or combined with any of LCM Systems wide range of instrumentation products to provide either a simple or more complex monitoring or control system.
Specification :
| Range (FSO) | 25g, 55g, 110g, 220g, 450g, 1000g, 1500g Equivalent to:- 1oz, 2oz, 4oz, 8oz, 18oz, 36oz, 54oz |
| Maximum Overload Range | 2500g for all ranges |
| Output Sensitivity | 4mV/V nominally |
| Zero Offset | < ±2% FSO |
| Accuracy | < ±0.3% FSO |
| Repeatability | < ±0.1% FSO |
| Excitation Voltage | 10vdc maximum |
| Bridge Resistance | 25g, 55g, 450g:- nominally 725Ω 110g, 220g, 1000g, 1500g:- nominally 1000Ω |
| Insulation Resistance | > 100MΩ at 50vdc |
| Operating Temperature Range | -40°C to +80°C |
| Compensated Temperature Range | +10°C to +60°C |
| Zero Temperature Coefficient | < ±0.05% FSO/°C |
| Span Temperature Coefficient | < ±0.05% FSO/°C |
| Environmental Protection Level | IP51 |
| Deflection | < ±0.03mm |
| Connection Type |
Via 4off PTFE insulated solder terminals |
| Caracteristică | Detalii |
|---|---|
| Range (FSO) | 25g, 55g, 110g, 220g, 450g, 1000g, 1500g Equivalent to:- 1oz, 2oz, 4oz, 8oz, 18oz, 36oz, 54oz |
| Maximum Overload Range | 2500g for all ranges |
| Output Sensitivity | 4mV/V nominally |
| Zero Offset | < ±2% FSO |
| Accuracy | < ±0.3% FSO |
| Repeatability | < ±0.1% FSO |
| Excitation Voltage | 10vdc maximum |
| Bridge Resistance | 25g, 55g, 450g:- nominally 725Ω 110g, 220g, 1000g, 1500g:- nominally 1000Ω |
| Insulation Resistance | > 100MΩ at 50vdc |
| Operating Temperature Range | -40°C to +80°C |
| Compensated Temperature Range | +10°C to +60°C |
| Zero Temperature Coefficient | < ±0.05% FSO/°C |
| Span Temperature Coefficient | < ±0.05% FSO/°C |
| Environmental Protection Level | IP51 |
| Deflection | < ±0.03mm |
| Connection Type | Via 4off PTFE insulated solder terminals Pin A + Signal Pin B + Excitation Pin C – Signal Pin D – Excitation |

Recenzii
Nu există recenzii până acum.