.
|
|
 |
- Functions with 1 aluminium off-center load cell made according to OIML R60 standards, with protection against dust and water splashes according to IP67 standards (350 Ohm input resistance).
- It is made up of carbon steel oven-fire painted sections and tubulars and fitted with clamps for the installation.
- Up to 15 Vdc power supply.
- IP67 hermetic junction box with shielded 5m long 6-pin cable for connection to the indicator / flow integrator.
|
 |
 |
 |
BAR SIZING |
|
 |
- To select the most suitable bar and verify in real time the feasibility of the system, fill in the data request form, which may be downloaded in the partners area.
- This data request form, correctly filled in, must accompany the price estimate request for the desired bar.
|
 |
 |
 |
EXTRAS AVAILABLE |
|
 |
- Belt speed encoder.
- Calibration weight.
- Special sizes and capacities.
- CPWEBELT flow integrator.
|
Code |
Belt w (mm) |
Max (kg) |
d (g) |
| BLT400 |
400 |
10 / 20 |
2 / 5 |
| BLT500 |
500 |
30 / 50 |
5 / 10 |
| BLT650 |
650 |
50 / 100 |
10 / 20 |
| BLT800 |
800 |
50 / 100 |
10 / 20 |
| BLT1000 |
1000 |
50 / 100 |
10 / 20 |
| BLT1200 |
1200 |
50 / 100 |
10 / 20 |
(*) The hourly flows shown on the chart are only approximate and are calculated assuming a belt speed of 40 m/min. and a material net weight on the weighed section equal to about a third of the load cell capacity
Speed encoder
| |
Code |
Description |
|
| |
TRV |
Speed encoder fitted with fastening joint. |
|
Calibration weight
| |
Code |
Description |
|
| |
PCAL |
Calibration weight for bar for continuous weighing BLT series. |
|
Protection for junction box/electronic circuits
| |
Code |
Description |
|
 |
GELBOX |
Anti condensation, insulating, and sealing gel. Useful for the protection of the electronic circuits of the weighing system, even in conditions of prolonged immersions in time. Pack of 300ml. |
|
Calibration service with Dini Argeo indicator (only at time of order)
| |
Code |
Description |
|
 |
CT4 |
ISO 17025 calibration certificate from 6 to 60 kg. For precision and industrial scales, crane scales. |
|
 |
CT5 |
ISO 17025 calibration certificate from 61 to 300 kg. For precision and industrial scales, crane scales. |
.
Recenzii
Nu există recenzii până acum.