Afisaje repetitoare

Informaţii

Producători

Produse noi

Produse vizualizate

Afisaj Repetitor DGT60 Mărește

Afisaj Repetitor DGT60

New product

Afisaj Repetitor DGT60. Greutate indicator repetor GOLIAT.

Producator : Dini Argeo.

Cerere oferta

More details

Informații

.

MAIN FEATURES
  • Functional 5-key waterproof keypad.
  • Large 6-digit display, 60 mm high, with very efficient SMD LEDs (software adjustment of the brightness intensity), complete of 6 Leds for indication of active functions, visible from over 25 m, with viewing angle up to 120° and with power up to 750 mcd.
  • IP68 stainless steel case complete of wall fixing bracket.
  • Dimensions: 410 x 67 x 165 mm.
  • Calibration, Set-Up parameters, configurable from keyboard or from PC with DINI TOOLS.
  • Max. 10.000e or multirange 2 x 3000e @ 0,3 µV/d in CE-M approved version for legal for trade use.
  • Max. 800.000d viewable with internal resolution up to 3.000.000 points.
  • Up to 8 signal linearisation points with DINITOOLS.
  • A/D 24 bit sigma-delta 4-channel conversion, max.200 conv./sec. with automatic selection.
  • Connectable with up to 16 analogue load cells with 350 Ohm input resistance.
  • Management of a weighing system with up to 4 cells with digital equalisation or management of up to 4 independent weighing systems.
  • Power supply from 12 to 24 Vdc with 110-240 Vac internal power supplier.
  • Available as Scale or as Repeater version.
  • Fitted with an air valve for regulating the humidity and the pressure inside the indicator.
 MAIN CERTIFICATIONS
  • EC Type Approval (EN45501)
  • OIML R76
  • OIML R61 - MID
 I/O SECTION
  • RS232/C bidirectional port configurable for connection to printer, PC, or other external units.
  • RS485 bidirectional port configurable for connection to PC, PLC, or other external units.
  • PROFIBUS serial interface (DGT60PB model).
  • 2 photomosfet outputs: 150 mA 48 Vac / 150 mA 60 Vdc (NO), with configurable functions.
  • 2 optoisolator photocouplers: 12÷24 Vdc, 5 mA min - 20 mA max, with configurable functions.
  • 16-bit analogue output (DGT60AN model) 4-20mA / 0-5Vdc / 0-10Vdc at choice; maximum applicable voltage: 350 Ohm; minimum applicable voltage resistance: 10 kohm.
 DGT60R REPEATER FUNCTIONS
  • Version with specific program for use of the indicator as a universal weight repeater or as a multi-scale repeater (MASTER) in combination with DFW/DGT/MCW.

  • FUNCTIONING MODES:
    - Multi-scale repeater (MASTER):
    function which allows to repeat up to 32 independent scales, with the possibility of managing their functions, or displaying and printing the sum of the weighs of all the scales.
    - UNIVERSAL weight repeater:
    function which allows to repeat the weight of any scales, through the configuration of the input string.
 OPTIONS ONLY AVAILABLE AT TIME OF ORDER
  • Option Box with thermal printer.
  • Ethernet interface.
  • External 868Mhz radio modem.
  • 433MHz radiofrequency remote control.
  • Real time clock.
  • Alibi Memory.
Available versions
  Code Description  
DGT60BC Weight indicator with 60mm LED display. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
DGT60AN Weight indicator with 60mm LED display and analogue output. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
DGT60PB-1 Weight indicator with 60mm LED display and Profibus. IP68 stainless steel case, 5-key keypad, and air valve for regulating the humidity and the pressure.
DGT60R Weight repeater with 60 mm LED display. IP68 stainless steel case, 5-key keypad, air valve for regulating the humidity and the pressure, and configurable protocol.
Optional power supply cords
  Code Description  
PWCORDUK Power supply cord with BS1363 plug (UK plug).
Visor and brackets
  Code Description  
STFR Stainless steel fixing bracket with adjustable inclination. For mounting the weight indicator on wall.
Legal for trade approval
  Code Description  
KCEM Plates and Welmec form for legal trade use of a scale. NET PRICE. Service available in combination to a Dini Argeo indicator.
Junction Box / Boards - Cell cables
  Code Description  
LCCBC (S1) Cable for connection between platform and indicator, l=50cm. Female connector to be soldered.
LCCB5C (S1) LCCBC cable + 5m extension cable.
LCCB10C (S1) LCCBC cable + 10m extension cable.
Printers/Labellers
  Code Description  
OBTPRI60 (S2) Integrated stainless steel thermal printer. Fitted with connection cable, internal power adapter for mounting inside the indicator. Combinable with DGT60 and DGT100 indicators.
Communication Interfaces
  Code Description  
RSCBUSBPG (S1) USB PC/RS232 converter cable, l=1,5m, with PG9. USB/RJ45 connector. For the connection to weight indicators with IP65 and IP68 protection system.
OBRF-2 (S2) External 868 MHz radio module, cable l=3m. ABS IP65 protecting box, 3 m cable, power supply from weight indicator. Max. distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels.
OBRFUSB-2 (S2) External 868 MHz radio frequency module, USB cable l=1m. Power supply directly from the USB port. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRFUSB-1 must be combined with another radio module).
OBRF232-2 (S2) External 868 MHz radio module with ABS box and cable l=3m. Fitted with DB9 connector and external power adapter. Max. functioning distance, in appropriate environmental and installation conditions: 70m indoors, 150m outdoors. 50 configurable channels. (OBRF232 must be combined with another radio module).
ALMEM (S1) Alibi memory (fiscal memory, max 120.000 weighs) for approved transmission of the weight to PC/PLC or data recording on MMC/USB. Real time clock integrated for print of the date/time.
ETHD (S2) Built-in Ethernet interface. Speed from 10 to 100 Mbps, TCP, UDP, IP, ARP, ICMP, Ethernet Mac protocols.
WIFITD (S2) Built-in WI-FI interface. For wireless connection (through access point) to the company computer system.
Date&Time option
  Code Description  
DFCLK (S1) Real time clock for printing/displaying of the date and time.
Connection cables
  Code Description  
RSCBPC RS232/C cable l=1,5m with PG9 and wires for terminal board.
RSCB5 RS232 cable l=5m. For the connection of the weight indicator to a weight repeater, without connectors.
RSCB10 RS232/C cable l=10m. For the connection of the weight indicator to a weight repeater, without connectors.
ETHCBRJ (S1) Ethernet cable, l=1,5m. Made up of fairlead, for connection between indicator and PC network.
Options for ATEX version
  Code Description  
DCATEXMB4 Declaration of ATEX conformity of the whole, Ex II 2GD IIC T6 T125°C X system, with relative label of whole system, for weight indicator connected to Dini Argeo zener barriers, connected to mechanical structure with ATEX load cells (each cell must be certified with CCATEX option). ATEX CONFORMITY DECLARATIONS will be supplied in English.
KMB4 Kit of 3 passive safety ATEX zener barriers in an ABS box. For up to 4 load cells of 350 ohm, for intrinsic protection weighing systems in an hazardous area. Marking of the single barrier: ATEX II (1) GD [Ex ia Ga] IIC [Ex ia Da] IIIC. Marking of the whole box with three Zener barriers: ATEX II 3G Ex nA II T4 IP65 (-20°C ≤ Ta ≤ +40°C).
Remote control
  Code Description  
TLR-1 (S2) Radio frequency remote control and receiver. 433MHz, with 6 key, for use up to 50 m of distance, in appropriate environmental conditions.

.

Detalii:

Recenzii

Nu sunt opinii ale clienților în acest moment.

Scrieţi o recenzie

Afisaj Repetitor DGT60

Afisaj Repetitor DGT60

Afisaj Repetitor DGT60. Greutate indicator repetor GOLIAT.

Producator : Dini Argeo.

Cerere oferta

Descărcări