Indicator cantarire DS485DIS...
Indicator cantarire DS485DIS
Producator: LCM Systems
This product is no longer in stock
The DS485DIS is an LED display module allowing the connection and summing of up to eight (8) DSC or DLC devices. The display enables the use of DSC or Dcells without the need for permanent connection to a PC or PLC.
The display can toggle between gross and zeroed net display and optionally allows the user to cycle through the individual displays that form the sum. The inputs are all synchronised so the summed display is a true representation of the instantaneous input without skew.
This display can connect to various RS485 DSC and DLC devices with the MantraBus II protocol. Suitable devices are: DSC4SMAN, DSC4HMAN, DLCSMAN and DLCHMAN.
The DSC and DLC devices must have sequential station numbers from 1 to the total number of devices. The default baudrate is 115200.
This module is configured using an RS232 connection to a PC or laptop. and Instrument Explorer software.
LCM Systems can supply this configured as part of a system complete with sensors, including embedded DCELL’s or external DSC’s. Please contact our technical team to discuss you requirements.
|Supply Voltage||8 to 18vdc|
|Current Consumption (no modules connected)||200mA max.|
|Communications Module Communications Bus||RS485 (8 data bits, 1 stop bit, no parity)|
|Configuration Bus||RS232 (8 data bits, 1 stop bit, no parity)|
|Display||6 digit red LED (20mm high digits)|
|Enclosure||Light Grey ABS, with 2off IP68 cable glands|
|Terminals||2.5mm saddle field terminals|
|Accessibility||All electronics and connections accessible by removing lid|
CE & Environmental
|Storage Temperature||-20 to +70°C|
|Operating Temperature||-10 to +50°C|
|Relative Humidity||95% maximum|
|Low Voltage Directive||2006/95/EC|
Nu sunt opinii ale clienților în acest moment.